ECO BRASS

69300 – ECO BRASS 

High Performance Lead-Free Brass

C69300 comes in hexagon, round, and other shaped brass rods and brass bars.

ECO BRASS C69300 is a high-performance, lead-free* brass. It’s a great replacement for leaded fittings and its corrosion resistance properties make it an excellent solution for water supply and plumbing applications.

The Super Alloy

Dynamic

  • Boiler and pressure vessel code registered alloy
  • Corrosion-resistant to chemicals found in water and gas

Strong

  • Strength equivalent to stainless steel
  • Does not get brittle at high temperatures
  • Corrosion-resistant equivalent to commercial bronze

Green

  • Leadfree
  • Arsenicfree
  • Bismuthfree
  • NSF 61 compliant

Chemistry Composition
Cu Si P Pb Fe Sn Ni Mn Zn
73.0-77.0% 2.7-3.4% 0.04-0.15% 0.09% max 0.10% max 0.20% max 0.10% max 0.10% max Remainder
Application: Machining-Forging
Chemistry specification: ASTM B371
Lengths: 10 TO 16 Feet
Bundle weights: 1,000 – 4,000 lbs.
Sizes/Shapes
Shape Diameter (inch)
Round 0.375″ – 2.50″
Hex / Hex RC 0.375″ – 2.00″
Shapes Consult Mill
Diameter/Tolerances +/-
Diameter (inch) Round Hexagonal, Octagonal
>0.150″-0.500″ 0.0020″ 0.0040″
>0.500″-1.000″ 0.0030″ 0.0050″
>1.000″-2.000″ 0.0040″ 0.0060″
>2.000″ 0.20% 0.40%
Minimum Mechanical Properties
Diameter (inch) Tensile Strength (ksi) Yield Strength (ksi) Elongation (%)
>0.150″-0.500″ 85 45 5
>0.500″-1.000″ 75 35 10
>1.000″-2.000″ 70 30 10

ECO BRASS C69300 has excellent dezincification corrosion resistance and excellent stress corrosion cracking resistance. Further, it is corrosion resistant to chemicals found in water and gas. It has high strength equivalent to stainless steel. It also has good machinability, excellent hot forgeability, easily accepts solder and brazing, and has excellent polishing and plating capabilities.

Not only is ECO BRASS C69300 lead-free and compliant with the Federal Drinking Water Act, it also support applications following the U.S. EPA standards for antimicrobial performance which kills Staphylococcus aureus, Pseudomonas aeruginosa, Salmonella choleraesuis, Mycobacterium bovis (BCG), Clostridium difficile, and viruses. Therefore, it can be used as an antimicrobial touch surface in homes and health care facilities 

Soldering lead to no-lead copper is possible. If the proper procedures are followed, especially in the preheating and heating process, consistent, high-quality solder joints can easily be achieved between copper tube and new, ECO BRASS no-lead copper alloy (brass or bronze) fittings/components. 

Please see reference material for more detailed instructions. 

ECO BRASS C69300 is available in lengths between 10 – 16 feet and bundle weights between 1,000 – 4,000 lbs. Its shapes include round, hexagon, and other shaped brass rods and brass, with diameters between: 

  • 375” – 2.500” in round
  • 375” x 2.00” in hex/hex RC

Note: For other shapes, consult the Wieland Chase Mill

ECO BRASS C69300 is typically utilized in PEX fittings, stop valves, ball valves, and both commercial and residential water faucets parts. It is also used in electric and electronic equipment parts and automotive parts.

Contact us to get started on your order. Wieland Chase is a brass forgings supplier and distributor, high strength brass manufacturer, brass rod fittings manufacturer, brass alloy supplier, brass rod manufacturer, brass parts supplier, brass machining supplier, bar manufacturer, castings manufacturer, and barstock distributor.

*This product complies with 0.25% weighted average lead content on wetted surfaces in accordance with Safe Water Drinking Act (SDWA) / Federal Public Law No. 111-380.

About Us

Wieland Chase is a leading brass manufacturer in North America. Since July 2019 Wieland Chase has become part of the strong global Wieland Group with a continued commitment to safety, quality and customer service. More about the Wieland Group

Contact Us

14212 Selwyn Drive
Montpelier, OH 43534
p 419-485-3193
p 800-537-4291
f  419-485-5945

Copyright 2019 © Wieland.
All Rights Reserved. Privacy Policy